|
|
Post by euritar on Jan 25, 2012 10:10:30 GMT -5
No computer, using my phone to read this, can't get Euritar card sucks. Maybe Tom'll release it as a limited edition card for those that don't get Promoter. If not, oh well.
|
|
|
|
Post by Tournament Master on Jan 25, 2012 10:43:03 GMT -5
So I tried it again today and it is giving me an error saying that the file is damaged and can not be repaired. Try it now. Uploaded a new file. |
|
|
|
Post by jasonjaconetti on Jan 25, 2012 12:39:07 GMT -5
It worked! Thanks
|
|
BloodGod
Infinity Challenge
CHIKARA pro is the BEST!! >:)~
Posts: 169
|
Post by BloodGod on Jan 26, 2012 21:19:17 GMT -5
Swarm said it all... WHOA!!! ;D This is the time to get Promotor, promotors... $15 for a 1/2 year of this kinda coolness?! Can hardly wait to see...  |
|
|
|
Post by cotgfb on Jan 30, 2012 5:58:52 GMT -5
I have tried printing the Euritar card twice with the same problem. The front and back don't match up. Looking at it closely, it appears that the images are not centered on the page. The left edge picture is farther from the left edge of the page than the right edge of the picture is from the right edge of the page, and the top and bottom of the picture are different distances from the top and bottom of the page. This occurs on both the front and the back of the card, with the added problem that the top of the front of the card and the top of the back of the card are different lengths from the top of the page, ditto for the bottoms of the cards and the sides. In order for the card to print properly, two-sided, the front and back of the cards have to be centered on the page, and they are not. I hope this can be corrected, as I really want a print of this card.
|
|
|
|
Post by marktaggart on Jan 30, 2012 7:54:35 GMT -5
For what it's worth, the Jimmy Hart card is even worse (or at least equally as bad): the front of the card is about a 1/2 inch lower on the page than the front, and is about 1/8 inch too narrow on either side.
|
|
|
|
Post by cotgfb on Feb 7, 2012 3:53:55 GMT -5
I pm'd Kris about the Euritar print problem and he has had a new pdf file linked in. Euritar is printing properly now.
|
|
King of the Ring!*~~