|
|
Post by throwingtoasters on Oct 19, 2022 21:46:35 GMT -5
The 4X6 UltraPro top loaders fit both LOW/Indy cards and COTG cards. Thanks! Why did someone claim they were too wide to fit? I think the issue is that they have to be UltraPro Top 4x6 Loaders. There are top loaders from other companies that say 4 x 6 but the opening is a tiny bit smaller that the UltraPro and so they don’t fit. Make sure it’s UltraPro and you’ll be fine. |
|
Leon
Infinity Challenge
rolling it all up
Posts: 241
|
Post by Leon on Oct 19, 2022 22:59:53 GMT -5
Thank you both, Vegas & throwingtoasters ! I also found a video from a local seller here where the seller lined up the 4x6 toploader with a ruler and the toploader really is around 4.5" wide. |
|
Leon
Infinity Challenge
rolling it all up
Posts: 241
|
Post by Leon on Oct 28, 2022 19:30:57 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 28, 2022 21:26:32 GMT -5
Amazon has plenty of Ultra Pro 4x6 top loaders for $18, that's why I was so surprised they went for so much in the auction. To be fair, it was for a great cause.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 28, 2022 21:37:30 GMT -5
The cards will fit in this, but I'm not sure the top loaders will. I could wrong, might buy one to try and if they fit buy more. |
|
Leon
Infinity Challenge
rolling it all up
Posts: 241
|
Post by Leon on Oct 29, 2022 3:45:49 GMT -5
@kevinb going by the description alone, it says it fits toploader 4x6's.
|
|
Leon
Infinity Challenge
rolling it all up
Posts: 241
|
Post by Leon on Oct 30, 2022 2:43:16 GMT -5
Thanks for the tip Leon. Let us know if they are any good? I'm a bit skeptical of the one vague review and the build quality, if it will not fall apart moving it around once the max. 175-180 toploaders(weight) is in it.
Yup, will do when I receive them in a couple of weeks (hopefully). |
|
Leon
Infinity Challenge
rolling it all up
Posts: 241
|
Post by Leon on Nov 11, 2022 22:18:16 GMT -5
Thanks for the tip Leon. Let us know if they are any good? I'm a bit skeptical of the one vague review and the build quality, if it will not fall apart moving it around once the max. 175-180 toploaders(weight) is in it.
Yup, will do when I receive them in a couple of weeks (hopefully). I received the boxes yesterday and just assembled them today. Though "assembled" doesn't really describe it. It's in one piece with the adhesive tape (those white triangles):  I only have 25 cards sleeved into Ultrapro toploaders for now, but I like how they fit:  You could probably fit in about 150-175 cards in there?  The charts sleeved into 6"x9"(?) Ultrapro do fit as well but I doubt you can close the box. There's room for only 1 on top.  I think it's a good storage solution. I would have wanted the four charts to fit in too, but that would have require a higher clearance on top. The only weak spot might be the double adhesive (they are pretty strong though) but I guess you can just use superglue if they fall apart. |
|
Leon
Infinity Challenge
rolling it all up
Posts: 241
|
Post by Leon on Nov 11, 2022 23:35:13 GMT -5
Here it is at 75 toploaders...  |
|
|
|
Post by tystates on Nov 16, 2022 19:48:59 GMT -5
I ordered one of these to try and got it today. Well you get 2 of them. I made my Reason feat roll to put them together LOL. All of my women's cards in top loaders for my 4 feds fit in one with still a little room left.
|
|
