|
|
Post by throwingtoasters on Jul 28, 2020 10:49:04 GMT -5
Looking a piloting the option to have cards sent out directly from Filsinger Games already in Ultra pro Top Loaders. Is that something that folks would be interested in? Depending on the cost, yes. Very much. Would add a little to shipping but would protect the cards from rubber bands and Wally. |
|
|
|
Post by TTX on Jul 28, 2020 11:41:03 GMT -5
if the cost was feasible, for sure. Protectors are basically required these days.
|
|
|
|
Post by Tournament Master on Jul 28, 2020 13:00:51 GMT -5
Looking a piloting the option to have cards sent out directly from Filsinger Games already in Ultra pro Top Loaders. Is that something that folks would be interested in? Depending on the cost, yes. Very much. Would add a little to shipping but would protect the cards from rubber bands and Wally. I figured if anyone would want this it would be you.  Looking at $1 per card extra, to cover the cost of the loaders, the extra shipping and the time to do it. |
|
|
|
Post by John-Drez on Jul 28, 2020 15:35:18 GMT -5
I've had good luck getting the Ultra Pro Top Loaders on Amazon, haven't had any issues yet. I would also add, you can order a laminating machine for under $30 and use that to protect your cards. I laminate my cards first then put them in the top loaders. Works very well to protect them.
|
|
|
|
Post by DK II on Jul 29, 2020 12:33:05 GMT -5
Looking a piloting the option to have cards sent out directly from Filsinger Games already in Ultra pro Top Loaders. Is that something that folks would be interested in? I would like it for the protection in shipping...not that I have had major issues, but it would be nice for the protection. I am with throwingtoasters one the rubber-bands...but understand the use of them... |
|
|
|
Post by throwingtoasters on Jul 29, 2020 14:06:51 GMT -5
Looking a piloting the option to have cards sent out directly from Filsinger Games already in Ultra pro Top Loaders. Is that something that folks would be interested in? I would like it for the protection in shipping...not that I have had major issues, but it would be nice for the protection. I am with throwingtoasters one the rubber-bands...but understand the use of them... With the little cardboard spacers TM uses now to protect the cards, rubber bands have become less of a problem and I really appreciate it. I did order a bunch of LOW Color sets recently and the PO folded the priority envelope at some point and creased the books all to crap but the cards made it just fine. Just ordered about 250 sleeves but I may just take FG up on this offer. |
|
|
|
Post by hexxstar on Nov 27, 2020 16:33:56 GMT -5
|
|
|
|
Post by Swarm on Nov 27, 2020 16:49:52 GMT -5
I’d get a few other opinions to be sure but they look good to me. |
|
|
|
Post by joebreakdown on Nov 27, 2020 17:07:28 GMT -5
I've stopped using card protectors as they were taking up so much room!
I've kept a few for my active cards. I had boxes full of 'em before
|
|
|
|
Post by Ken West on Nov 27, 2020 19:20:35 GMT -5
I use that brand, work perfect for me.
|
|
